Industrial Screw Chiller_Air / Water
Water Cooled Chiller
Product Name: Air-cooled Chiller, Industrial Water Chiller, Water Chiller
Brand Name: HYNAAR
Voltage: 3PH~220V/380/415V~50HZ/60HZ
Refrigeration Capacity: 13~143 KW
Refrigerant: R22 / R134a / R407c
Control Method: Outside The Balanced Thermal Expansion Valve
Evaporator: Water Tank Coil
Water Tank Capacity: 50~370 L
Chilled Water Flow: 2.24~24.6 m³/h
Condenser: Efficient Aluminum Finned Copper Jacket + Low Noise External Rotor Fan
Pump Power: 0.37~4.5 KW
Pump Lift: 20~52 M
Water Cooled Chiller :
Industrial chiller can always output ice water with a temperature lower than the ambient temperature. It can uses where the temperature needs to be reduced. It can directly cools or indirect heat exchanged.
The chiller can be used to reduce the temperature of injection molds and improve the quality of plastic products; vacuum coating and cooling to control the temperature of the vacuum coating machine; food industry cooling and rapid cooling processing; chemical industry to effectively control the temperature of chemicals; building cooling and rapid concrete cooling Condensation etc.
The chiller is a type of refrigeration equipment that cools and recycles water. The cooling water temperature can be automatically acted in line with requirements. It almost does not consume water. Long-term use can save one lot of water. Therefore, compared to the mode of cooling the equipment by using tap water discharge, Industrial chiller is an ideal equipment that can make the equipment quickly reach the ideal cooling effect and save energy.
Product Features
1. Using the international advanced scroll or piston compressor, the components of electrical appliances and refrigeration systems are world brand products.
2. Built-in stainless steel water tank, high performance, high flow special pump.
3. The bottom of the fuselage is equipped with movable casters, which are flexible and convenient to use.
4. Over 50 kW, there are double refrigeration circuits. Even if the primary circuit fails, the other circuit can run as usual.
5. Streamlined aesthetic design, operation panel convex and inclined surface design (humanized design), operation procedures at a glance.
6. Comparing with the traditional control mode, the special controller has obvious advantages, such as anti-electromagnetic interference, high resistance to cold and heat, strong control logic, sensitive response, and accurate action.
Comprehensive safety protection:
1) high and low-pressure protection and safety valve of the refrigeration system;
2) Double protection of compressor overload soft and hard
3) under-phase, reverse, under-voltage and over-voltage protection of power supply;
4) anti-freezing protection and water flow protection of water system.
| Model | SV-L10W | |
| Voltage | 380V/50Hz/3Phase | |
| Temperature range | 3℃ - indoor temperature (below 0 ℃ can be customized) |
|
| Input Power | KW | 10 |
| Refrigeration capacity |
KW | 30 |
| Kcal/h | 25800 | |
| Compressor | Type | Hermetic scroll type |
| Power（KW） | 3.73*2 | |
| Brand | Panasonic | |
| Number | 2 | |
| Condenser | Type | Shell and tube |
| Cooling water（m³/H） | 6.76 | |
| Inlet and outlet pipe diameter | 1-1/2" | |
| Evaporator | Type | Tank coil |
| Cooling water（m³/H） | 5.2 | |
| Inlet and outlet pipe diameter | 1-1/2" | |
| Tank capacity | 120L | |
| Refrigerant | Type | R22 |
| Control mode | Outside the balanced expansion valve | |
| Water pump | Power | 0.75KW |
| Lift | 22m | |
| Size | L | 1300mm |
| W | 710mm | |
| H | 1390mm | |
| Weight | KG | 370 |
| Note: 1.Chilled water range 3-35 ℃, chilled water inlet temperature difference 3-8 ℃, cooling water range 18-37 ℃, cooling water inlet temperature 3.5-10 ℃. 2.Refrigeration capacity is according to, the chilled water inlet and outlet temperature is 12 ℃/7 ℃, the cooling water inlet and outlet temperature is 35 ℃/30 ℃. 3.Above parameters are voltage 380v50hz 3 phase,refrigerant R22.Other parameters please call staff. Protection device motor overload, motor overheating,High temperature evacuation, oil pressure difference protection, high and low pressure protection |
||
| Model | SV-L12W | |
| Voltage | 380V/50Hz/3Phase | |
| Temperature range | 3℃ - indoor temperature (below 0 ℃ can be customized) |
|
| Input Power | KW | 11 |
| Refrigeration capacity |
KW | 34.2 |
| Kcal/h | 29412 | |
| Compressor | Type | Hermetic scroll type |
| Power（KW） | 4.475*2 | |
| Brand | Panasonic | |
| Number | 2 | |
| Condenser | Type | Shell and tube |
| Cooling water（m³/H） | 7.9 | |
| Inlet and outlet pipe diameter | 1-1/2" | |
| Evaporator | Type | Tank coil |
| Cooling water（m³/H） | 5.89 | |
| Inlet and outlet pipe diameter | 2" | |
| Tank capacity | 160L | |
| Refrigerant | Type | R22 |
| Control mode | Outside the balanced expansion valve | |
| Water pump | Power | 0.75KW |
| Lift | 22m | |
| Size | L | 1300mm |
| W | 710mm | |
| H | 1390mm | |
| Weight | KG | 430 |
| Note: 1.Chilled water range 3-35 ℃, chilled water inlet temperature difference 3-8 ℃, cooling water range 18-37 ℃, cooling water inlet temperature 3.5-10 ℃. 2.Refrigeration capacity is according to, the chilled water inlet and outlet temperature is 12 ℃/7 ℃, the cooling water inlet and outlet temperature is 35 ℃/30 ℃. 3.Above parameters are voltage 380v50hz 3 phase,refrigerant R22..Other parameters please call staff. Protection device :motor overload, motor overheating,High temperature evacuation, oil pressure difference protection, high and low pressure protection |
||
| Model | SV-L15W | |
| Voltage | 380V/50Hz/3Phase | |
| Temperature range | 3℃ - indoor temperature (below 0 ℃ can be customized) |
|
| Input Power | KW | 15 |
| Refrigeration capacity |
KW | 48.5 |
| Kcal/h | 41710 | |
| Compressor | Type | Hermetic scroll type |
| Power（KW） | 5.59*2 | |
| Brand | Panasonic | |
| Number | 2 | |
| Condenser | Type | Shell and tube |
| Cooling water（m³/H） | 10.7 | |
| Inlet and outlet pipe diameter | 2" | |
| Evaporator | Type | Tank coil |
| Cooling water（m³/H） | 8.35 | |
| Inlet and outlet pipe diameter | 2" | |
| Tank capacity | 200L | |
| Refrigerant | Type | R22 |
| Control mode | Outside the balanced expansion valve | |
| Water pump | Power | 1.5KW |
| Lift | 24m | |
| Size | L | 1535mm |
| W | 800mm | |
| H | 1514mm | |
| Weight | KG | 700 |
| Note: 1.Chilled water range 3-35 ℃, chilled water inlet temperature difference 3-8 ℃, cooling water range 18-37 ℃, cooling water inlet temperature 3.5-10 ℃. 2.Refrigeration capacity is according to, the chilled water inlet and outlet temperature is 12 ℃/7 ℃, the cooling water inlet and outlet temperature is 35 ℃/30 ℃. 3.Above parameters are voltage 380v50hz 3 phase,refrigerant R22..Other parameters please call staff. Protection device :motor overload, motor overheating,High temperature evacuation, oil pressure difference protection, high and low pressure protection |
||
| Model | SV-L20W | |
| Voltage | 380V/50Hz/3Phase | |
| Temperature range | 3℃ - indoor temperature (below 0 ℃ can be customized) |
|
| Input Power | KW | 20 |
| Refrigeration capacity |
KW | 61 |
| Kcal/h | 52460 | |
| Compressor | Type | Hermetic scroll type |
| Power（KW） | 7.46*2 | |
| Brand | Panasonic | |
| Number | 2 | |
| Condenser | Type | Shell and tube |
| Cooling water（m³/H） | 13.9 | |
| Inlet and outlet pipe diameter | 2" | |
| Evaporator | Type | Tank coil |
| Cooling water（m³/H） | 10.3 | |
| Inlet and outlet pipe diameter | 2-1/2" | |
| Tank capacity | 250L | |
| Refrigerant | Type | R22 |
| Control mode | Outside the balanced expansion valve | |
| Water pump | Power | 2.25KW |
| Lift | 30m | |
| Size | L | 1835mm |
| W | 800mm | |
| H | 1514mm | |
| Weight | KG | 750 |
| Note: 1.Chilled water range 3-35 ℃, chilled water inlet temperature difference 3-8 ℃, cooling water range 18-37 ℃, cooling water inlet temperature 3.5-10 ℃. 2.Refrigeration capacity is according to, the chilled water inlet and outlet temperature is 12 ℃/7 ℃, the cooling water inlet and outlet temperature is 35 ℃/30 ℃. 3.Above parameters are voltage 380v50hz 3 phase,refrigerant R22..Other parameters please call staff. Protection device :motor overload, motor overheating,High temperature evacuation, oil pressure difference protection, high and low pressure protection |
||
| Model | SV-L25W | |
| Voltage | 380V/50Hz/3Phase | |
| Temperature range | 3℃ - indoor temperature (below 0 ℃ can be customized) |
|
| Input Power | KW | 22 |
| Refrigeration capacity |
KW | 68.3 |
| Kcal/h | 58738 | |
| Compressor | Type | Hermetic scroll type |
| Power（KW） | 9.32*2 | |
| Brand | Panasonic | |
| Number | 2 | |
| Condenser | Type | Shell and tube |
| Cooling water（m³/H） | 15.8 | |
| Inlet and outlet pipe diameter | 2-1/2" | |
| Evaporator | Type | Tank coil |
| Cooling water（m³/H） | 11.76 | |
| Inlet and outlet pipe diameter | 2-1/2" | |
| Tank capacity | 250L | |
| Refrigerant | Type | R22 |
| Control mode | Outside the balanced expansion valve | |
| Water pump | Power | 2.25KW |
| Lift | 30m | |
| Size | L | 1835mm |
| W | 800mm | |
| H | 1514mm | |
| Weight | KG | 800 |
| Note: 1.Chilled water range 3-35 ℃, chilled water inlet temperature difference 3-8 ℃, cooling water range 18-37 ℃, cooling water inlet temperature 3.5-10 ℃. 2.Refrigeration capacity is according to, the chilled water inlet and outlet temperature is 12 ℃/7 ℃, the cooling water inlet and outlet temperature is 35 ℃/30 ℃. 3.Above parameters are voltage 380v50hz 3 phase,refrigerant R22..Other parameters please call staff. Protection device :motor overload, motor overheating,High temperature evacuation, oil pressure difference protection, high and low pressure protection |
||
| Model | SV-L30W | |
| Voltage | 380V/50Hz/3Phase | |
| Temperature range | 3℃ - indoor temperature (below 0 ℃ can be customized) |
|
| Input Power | KW | 31 |
| Refrigeration capacity |
KW | 97 |
| Kcal/h | 83420 | |
| Compressor | Type | Hermetic scroll type |
| Power（KW） | 7.46*3 | |
| Brand | Panasonic | |
| Number | 3 | |
| Condenser | Type | Shell and tube |
| Cooling water（m³/H） | 20.5 | |
| Inlet and outlet pipe diameter | 3" | |
| Evaporator | Type | Tank coil |
| Cooling water（m³/H） | 16.7 | |
| Inlet and outlet pipe diameter | 2-1/2" | |
| Tank capacity | 265L | |
| Refrigerant | Type | R22 |
| Control mode | Outside the balanced expansion valve | |
| Water pump | Power | 2.25KW |
| Lift | 30m | |
| Size | L | 1880mm |
| W | 910mm | |
| H | 1600mm | |
| Weight | KG | 950 |
| Note: 1.Chilled water range 3-35 ℃, chilled water inlet temperature difference 3-8 ℃, cooling water range 18-37 ℃, cooling water inlet temperature 3.5-10 ℃. 2.Refrigeration capacity is according to, the chilled water inlet and outlet temperature is 12 ℃/7 ℃, the cooling water inlet and outlet temperature is 35 ℃/30 ℃. 3.Above parameters are voltage 380v50hz 3 phase,refrigerant R22..Other parameters please call staff. Protection device :motor overload, motor overheating,High temperature evacuation, oil pressure difference protection, high and low pressure protection |
||
| Model | SV-L40W | |
| Voltage | 380V/50Hz/3Phase | |
| Temperature range | 3℃ - indoor temperature (below 0 ℃ can be customized) |
|
| Input Power | KW | 39 |
| Refrigeration capacity |
KW | 122 |
| Kcal/h | 104920 | |
| Compressor | Type | Hermetic scroll type |
| Power（KW） | 7.46*4 | |
| Brand | Panasonic | |
| Number | 4 | |
| Condenser | Type | Shell and tube |
| Cooling water（m³/H） | 27.8 | |
| Inlet and outlet pipe diameter | 3" | |
| Evaporator | Type | Tank coil |
| Cooling water（m³/H） | 20.6 | |
| Inlet and outlet pipe diameter | 3" | |
| Tank capacity | 330L | |
| Refrigerant | Type | R22 |
| Control mode | Outside the balanced expansion valve | |
| Water pump | Power | 3.75KW |
| Lift | 40m | |
| Size | L | 2100mm |
| W | 1100mm | |
| H | 1960mm | |
| Weight | KG | 1200 |
| Note: 1.Chilled water range 3-35 ℃, chilled water inlet temperature difference 3-8 ℃, cooling water range 18-37 ℃, cooling water inlet temperature 3.5-10 ℃. 2.Refrigeration capacity is according to, the chilled water inlet and outlet temperature is 12 ℃/7 ℃, the cooling water inlet and outlet temperature is 35 ℃/30 ℃. 3.Above parameters are voltage 380v50hz 3 phase,refrigerant R22..Other parameters please call staff. Protection device :motor overload, motor overheating,High temperature evacuation, oil pressure difference protection, high and low pressure protection |
||
| Model | SV-L50W | |
| Voltage | 380V/50Hz/3Phase | |
| Temperature range | 3℃ - indoor temperature (below 0 ℃ can be customized) |
|
| Input Power | KW | 49 |
| Refrigeration capacity |
KW | 136.6 |
| Kcal/h | 117476 | |
| Compressor | Type | Hermetic scroll type |
| Power（KW） | 9.32*4 | |
| Brand | Panasonic | |
| Number | 4 | |
| Condenser | Type | Shell and tube |
| Cooling water（m³/H） | 31.6 | |
| Inlet and outlet pipe diameter | 3" | |
| Evaporator | Type | Tank coil |
| Cooling water（m³/H） | 23.52 | |
| Inlet and outlet pipe diameter | 3" | |
| Tank capacity | 350L | |
| Refrigerant | Type | R22 |
| Control mode | Outside the balanced expansion valve | |
| Water pump | Power | 4.5KW |
| Lift | 52m | |
| Size | L | 2200mm |
| W | 1150mm | |
| H | 2100mm | |
| Weight | KG | 1300 |
| Note: 1.Chilled water range 3-35 ℃, chilled water inlet temperature difference 3-8 ℃, cooling water range 18-37 ℃, cooling water inlet temperature 3.5-10 ℃. 2.Refrigeration capacity is according to, the chilled water inlet and outlet temperature is 12 ℃/7 ℃, the cooling water inlet and outlet temperature is 35 ℃/30 ℃. 3.Above parameters are voltage 380v50hz 3 phase,refrigerant R22..Other parameters please call staff. Protection device :motor overload, motor overheating,High temperature evacuation, oil pressure difference protection, high and low pressure protection |
||
Water Cooled Screw Chiller
Name: Water Cooled Screw Chiller
Type: Water-Cooled
Model: HDE30-08 HDE30-12 HDE 30-16 HDE30-20 HDE30-24
Brand Name: HYNAAR
Voltage: 3PH~220V/380/415V~50HZ/60HZ
Certification: CE, ROHS, UL, ISO9001
Refrigerant: R134a/R407c/R410a
Application: Industrial Cooling Solutions
Cooling capacity: 18KW~4000KW
Water-cooled Screw Chillers:
Water-cooled Screw Chillers are designed to work within extreme tropicalized weather conditions while maintaining the highest energy efficiency.
Designing and the choice of equipment are critical to conform to superior standards. Manufacturing and testing standards at our facilities are at par with the best, internationally.
Installed equipment are operation friendly and are backed by the competent engineering team to realize the advantage while being in operation.
Water-cooled Chiller is to provide a cooling process for better industrial production. In the plastic molding industry, it improves the quality of molded products and shortens the period of injection molding cycles. Hence maximizes the productivity of plastic molding manufacturing.
And water could be used in various different industries, just depends on the needs.
Features:
1. Employing original double SCREW compressor, Compressor may according to loading auto-adjust, add a level sensor for preventing compressor low-loading to luck-oil, extent use life
2. Employing all-new imported high-class component
3. Employing two sets of the compressor which can be used jointly or independent
4. Switch control, easy operation, and maintenance
5. The weld of the brass pipe is non-oxidization
6.Condenser and Evaporator both to conform GB150, GB151, TB/T4750-2003,operation safe
| Model | SV-L50DW | |
| Voltage | 380V/50Hz/3Phase | |
| Temperature range | 3℃ - indoor temperature (below 0 ℃ can be customized) |
|
| Input Power | 38kw | |
| Refrigeration capacity | KW | 176 |
| Kcal/h | 151360 | |
| Compressor | Type | Semi-Closed Screw Compressor |
| Start Mode | Y-∆ | |
| Energy Control | 0-25-50-75-100 | |
| Condenser | Type | Shell and Tube |
| Chilled water rate（m³/H） | 33 | |
| Water Pipe(Inch) | 3" | |
| Evaporator | Type | Shell and Tube |
| Cooling water（m³/H） | 30 | |
| Inlet and outlet pipe diameter(Inch) | 3" | |
| Refrigerant | Type | R22 |
| Control mode | Outside balanced thermal expansion valve | |
| Size | L | 2130mm |
| W | 855mm | |
| H | 1540mm | |
| Weight | KG | 950 |
| Note: 1.Chilled water range 3-35 ℃, chilled water inlet temperature difference 3-8 ℃, cooling water range 18-37 ℃, cooling water inlet temperature 3.5-10 ℃. 2.Refrigeration capacity is according to, the chilled water inlet and outlet temperature is 12 ℃/7 ℃, the cooling water inlet and outlet temperature is 35 ℃/30 ℃. 3.Above parameters are voltage 380v50hz 3 phase,refrigerant R22..Other parameters please call staff. Protection device :motor overload, motor overheating,High temperature evacuation, oil pressure difference protection, high and low pressure protection |
||
| Model | SV-L60DW | |
| Voltage | 380V/50Hz/3Phase | |
| Temperature range | 3℃ - indoor temperature (below 0 ℃ can be customized) |
|
| Input Power | 43kw | |
| Refrigeration capacity | KW | 191.6 |
| Kcal/h | 164776 | |
| Compressor | Type | Semi-Closed Screw Compressor |
| Start Mode | Y-∆ | |
| Energy Control | 0-25-50-75-100 | |
| Condenser | Type | Shell and Tube |
| Chilled water rate（m³/H） | 38 | |
| Water Pipe(Inch) | 3" | |
| Evaporator | Type | Shell and Tube |
| Cooling water（m³/H） | 32.9 | |
| Inlet and outlet pipe diameter(Inch) | 3" | |
| Refrigerant | Type | R22 |
| Control mode | Outside balanced thermal expansion valve | |
| Size | L | 2450mm |
| W | 985mm | |
| H | 1600mm | |
| Weight | KG | 1120 |
| Note: 1.Chilled water range 3-35 ℃, chilled water inlet temperature difference 3-8 ℃, cooling water range 18-37 ℃, cooling water inlet temperature 3.5-10 ℃. 2.Refrigeration capacity is according to, the chilled water inlet and outlet temperature is 12 ℃/7 ℃, the cooling water inlet and outlet temperature is 35 ℃/30 ℃. 3.Above parameters are voltage 380v50hz 3 phase,refrigerant R22..Other parameters please call staff. Protection device :motor overload, motor overheating,High temperature evacuation, oil pressure difference protection, high and low pressure protection |
||
| Model | SV-L80DW | |
| Voltage | 380V/50Hz/3Phase | |
| Temperature range | 3℃ - indoor temperature (below 0 ℃ can be customized) |
|
| Input Power | 57kw | |
| Refrigeration capacity | KW | 256.4 |
| Kcal/h | 220504 | |
| Compressor | Type | Semi-Closed Screw Compressor |
| Start Mode | Y-∆ | |
| Energy Control | 0-25-50-75-100 | |
| Condenser | Type | Shell and Tube |
| Chilled water rate（m³/H） | 52 | |
| Water Pipe(Inch) | 3" | |
| Evaporator | Type | Shell and Tube |
| Cooling water（m³/H） | 44.1 | |
| Inlet and outlet pipe diameter(Inch) | 3" | |
| Refrigerant | Type | R22 |
| Control mode | Outside balanced thermal expansion valve | |
| Size | L | 2450mm |
| W | 985mm | |
| H | 1600mm | |
| Weight | KG | 1300 |
| Note: 1.Chilled water range 3-35 ℃, chilled water inlet temperature difference 3-8 ℃, cooling water range 18-37 ℃, cooling water inlet temperature 3.5-10 ℃. 2.Refrigeration capacity is according to, the chilled water inlet and outlet temperature is 12 ℃/7 ℃, the cooling water inlet and outlet temperature is 35 ℃/30 ℃. 3.Above parameters are voltage 380v50hz 3 phase,refrigerant R22..Other parameters please call staff. Protection device :motor overload, motor overheating,High temperature evacuation, oil pressure difference protection, high and low pressure protection |
||
| Model | SV-L100DW | |
| Voltage | 380V/50Hz/3Phase | |
| Temperature range | 3℃ - indoor temperature (below 0 ℃ can be customized) |
|
| Input Power | 74kw | |
| Refrigeration capacity | KW | 321 |
| Kcal/h | 276060 | |
| Compressor | Type | Semi-Closed Screw Compressor |
| Start Mode | Y-∆ | |
| Energy Control | 0-25-50-75-100 | |
| Condenser | Type | Shell and Tube |
| Chilled water rate（m³/H） | 68 | |
| Water Pipe(Inch) | 4" | |
| Evaporator | Type | Shell and Tube |
| Cooling water（m³/H） | 55 | |
| Inlet and outlet pipe diameter(Inch) | 4" | |
| Refrigerant | Type | R22 |
| Control mode | Outside balanced thermal expansion valve | |
| Size | L | 2750mm |
| W | 1050mm | |
| H | 1600mm | |
| Weight | KG | 1720 |
| Note: 1.Chilled water range 3-35 ℃, chilled water inlet temperature difference 3-8 ℃, cooling water range 18-37 ℃, cooling water inlet temperature 3.5-10 ℃. 2.Refrigeration capacity is according to, the chilled water inlet and outlet temperature is 12 ℃/7 ℃, the cooling water inlet and outlet temperature is 35 ℃/30 ℃. 3.Above parameters are voltage 380v50hz 3 phase,refrigerant R22..Other parameters please call staff. Protection device :motor overload, motor overheating,High temperature evacuation, oil pressure difference protection, high and low pressure protection |
||
Air Cooled Chiller
Product Name: Air-cooled Chiller, Industrial Water Chiller, Water Chiller
Brand Name: HYNAAR
Voltage: 3PH~220V/380/415V~50HZ/60HZ
Refrigeration Capacity: 13~143 KW
Refrigerant: R22 / R134a / R407c
Control Method: Outside The Balanced Thermal Expansion Valve
Evaporator: Water Tank Coil
Water Tank Capacity: 50~370 L
Chilled Water Flow: 2.24~24.6 m³/h
Condenser: Efficient Aluminum Finned Copper Jacket + Low Noise External Rotor Fan
Pump Power: 0.37~4.5 KW
Pump Lift: 20~52 M
Air-cooled Chiller:
Air-cooled Chiller is to provide a cooling process for better industrial production. In the plastic molding industry,
it improves the quality of molded products and shortens the period of injection molding cycles. Hence maximizes the productivity of plastic molding manufacturing.
And water could be used in various different industries, just depends on the needs.
Industrial Air Chiller features
1. The Air-cooled chiller is to provide a cooling process to plastic molds to improve molded product quality and cut down injection cycle time. Hence maximizes plastic molding machines productivity.
2. Installed with import compressors, highly efficient shell condenser and evaporator, excellent cooling, quiet and low electricity consumption.
3. Microprocessor control, easy to operate;
4. Unique open reservoir tank made of stainless steel, easy cleaning, and maintenance;
5. Pipeline well-arranged to save energy;
6. Installed will precise electronic thermostat accurately maintains temperature within 0-60 degree;
7. Installed with current overload protector, high and low-pressure switch, electronic timer delay, fault display system;
8. Screen liquid crystal display of chill water outlet and inlet with temperatures setting;
9. Single, double or four compressors combination unit available;
10. Industrially designed, elegant and ergonomic.
| Model | SV-LF10A | |
| Voltage | 380V/50Hz/3Phase | |
| Temperature range | 3℃ - indoor temperature (below 0 ℃ can be customized) |
|
| Input Power | KW | 10 |
| Refrigeration capacity |
KW | 26.1 |
| Kcal/h | 22446 | |
| Compressor | Type | Hermetic scroll type |
| Power（KW） | 3.75*2 | |
| Brand | Panasonic | |
| Number | 2 | |
| Condenser | Type | Efficient copper tube with aluminum finned + low noise outer rotor fan |
| Air volume（m³/H） | 10000 | |
| Evaporator | Type | Tank coil |
| Cooling water（m³/H） | 4.47 | |
| Inlet and outlet pipe diameter | 1-1/2" | |
| Tank capacity | 120L | |
| Refrigerant | Type | R22 |
| Control mode | Outside the balanced expansion valve | |
| Water pump | Power | 0.75KW |
| Lift | 22m | |
| Size | L | 1600mm |
| W | 860mm | |
| H | 1555mm | |
| Weight | KG | 450 |
| Note: 1.Chilled water range 3-35 ℃, chilled water inlet temperature difference 3-8 ℃, cooling water range 18-37 ℃, cooling water inlet temperature 3.5-10 ℃. 2.Refrigeration capacity is according to, the chilled water inlet and outlet temperature is 12 ℃/7 ℃, the cooling water inlet and outlet temperature is 35 ℃/30 ℃. 3.Above parameters are voltage 380v50hz 3 phase,refrigerant R22..Other parameters please call staff. Protection device :motor overload, motor overheating,High temperature evacuation, oil pressure difference protection, high and low pressure protection |
||
| Model | SV-LF12A | |
| Voltage | 380V/50Hz/3Phase | |
| Temperature range | 3℃ - indoor temperature (below 0 ℃ can be customized) |
|
| Input Power | KW | 12 |
| Refrigeration capacity |
KW | 29.75 |
| Kcal/h | 25585 | |
| Compressor | Type | Hermetic scroll type |
| Power（KW） | 4.475*2 | |
| Brand | Panasonic | |
| Number | 2 | |
| Condenser | Type | Efficient copper tube with aluminum finned + low noise outer rotor fan |
| Air volume（m³/H） | 12000 | |
| Evaporator | Type | Tank coil |
| Cooling water（m³/H） | 5.12 | |
| Inlet and outlet pipe diameter | 2" | |
| Tank capacity | 120L | |
| Refrigerant | Type | R22 |
| Control mode | Outside the balanced expansion valve | |
| Water pump | Power | 0.75KW |
| Lift | 22m | |
| Size | L | 1370mm |
| W | 940mm | |
| H | 1750mm | |
| Weight | KG | 450 |
| Note: 1.Chilled water range 3-35 ℃, chilled water inlet temperature difference 3-8 ℃, cooling water range 18-37 ℃, cooling water inlet temperature 3.5-10 ℃. 2.Refrigeration capacity is according to, the chilled water inlet and outlet temperature is 12 ℃/7 ℃, the cooling water inlet and outlet temperature is 35 ℃/30 ℃. 3.Above parameters are voltage 380v50hz 3 phase,refrigerant R22..Other parameters please call staff. Protection device :motor overload, motor overheating,High temperature evacuation, oil pressure difference protection, high and low pressure protection |
||
| Model | SV-LF15A | |
| Voltage | 380V/50Hz/3Phase | |
| Temperature range | 3℃ - indoor temperature (below 0 ℃ can be customized) |
|
| Input Power | KW | 16 |
| Refrigeration capacity |
KW | 41.8 |
| Kcal/h | 35948 | |
| Compressor | Type | Hermetic scroll type |
| Power（KW） | 5.59*2 | |
| Brand | Panasonic | |
| Number | 2 | |
| Condenser | Type | Efficient copper tube with aluminum finned + low noise outer rotor fan |
| Air volume（m³/H） | 15000 | |
| Evaporator | Type | Tank coil |
| Cooling water（m³/H） | 7.2 | |
| Inlet and outlet pipe diameter | 2" | |
| Tank capacity | 200L | |
| Refrigerant | Type | R22 |
| Control mode | Outside the balanced expansion valve | |
| Water pump | Power | 1.5KW |
| Lift | 24m | |
| Size | L | 1875mm |
| W | 1100mm | |
| H | 1750mm | |
| Weight | KG | 600 |
| Note: 1.Chilled water range 3-35 ℃, chilled water inlet temperature difference 3-8 ℃, cooling water range 18-37 ℃, cooling water inlet temperature 3.5-10 ℃. 2.Refrigeration capacity is according to, the chilled water inlet and outlet temperature is 12 ℃/7 ℃, the cooling water inlet and outlet temperature is 35 ℃/30 ℃. 3.Above parameters are voltage 380v50hz 3 phase,refrigerant R22..Other parameters please call staff. Protection device :motor overload, motor overheating,High temperature evacuation, oil pressure difference protection, high and low pressure protection |
||
| Model | SV-LF25A | |
| Voltage | 380V/50Hz/3Phase | |
| Temperature range | 3℃ - indoor temperature (below 0 ℃ can be customized) |
|
| Input Power | KW | 23 |
| Refrigeration capacity |
KW | 59.5 |
| Kcal/h | 51170 | |
| Compressor | Type | Hermetic scroll type |
| Power（KW） | 9.32*2 | |
| Brand | Panasonic | |
| Number | 2 | |
| Condenser | Type | Efficient copper tube with aluminum finned + low noise outer rotor fan |
| Air volume（m³/H） | 25000 | |
| Evaporator | Type | Tank coil |
| Cooling water（m³/H） | 10.25 | |
| Inlet and outlet pipe diameter | 2-1/2" | |
| Tank capacity | 250L | |
| Refrigerant | Type | R22 |
| Control mode | Outside the balanced expansion valve | |
| Water pump | Power | 2.25KW |
| Lift | 30m | |
| Size | L | 2335mm |
| W | 930mm | |
| H | 1700mm | |
| Weight | KG | 980 |
| Note: 1.Chilled water range 3-35 ℃, chilled water inlet temperature difference 3-8 ℃, cooling water range 18-37 ℃, cooling water inlet temperature 3.5-10 ℃. 2.Refrigeration capacity is according to, the chilled water inlet and outlet temperature is 12 ℃/7 ℃, the cooling water inlet and outlet temperature is 35 ℃/30 ℃. 3.Above parameters are voltage 380v50hz 3 phase,refrigerant R22..Other parameters please call staff. Protection device :motor overload, motor overheating,High temperature evacuation, oil pressure difference protection, high and low pressure protection |
||
Air Cooled Screw Chiller
Name: Air Cooled Screw Chiller
Type: Air-Cooled
Model: HDE30-08 HDE30-12 HDE 30-16 HDE30-20 HDE30-24
Brand Name: HYNAAR
Voltage: 3PH~220V/380/415V~50HZ/60HZ
Certification: CE, ROHS, UL, ISO9001
Refrigerant: R134a/R407c/R410a
Application: Industrial Cooling Solutions
Cooling capacity: 18KW~4000KW
Air-Cooled Screw Chillers
The Air-cooled Screw Chillers, Chillers are suitable for working in extreme tropical weather conditions while maintaining energy and operational efficiency.
The equipment is designed and manufactured in compliance with superior designing and manufacturing standards.
The environment friendly chillers are easy to install and are tested on all the required international parameters to be at par with the best.
Industrial Chiller Features
1. Employing original double SCREW compressor, Compressor may according to loading auto-adjust, add a level sensor for preventing compressor low-loading to luck-oil, extent use life
2. Employing all-new imported high-class component
3. Employing two sets of the compressor which can be used jointly or independent
4. Switch control, easy operation, and maintenance
5. The weld of the brass pipe is non-oxidization
6.Condenser and Evaporator both to conform GB150, GB151, TB/T4750-2003,operation safe
| Model | SV-LFD50A | |
| Voltage | 380V/50Hz/3Phase | |
| lnput Power | KW | 54 |
| Temperature range | 3℃ - indoor temperature (below 0 ℃ can be customized) |
|
| Refrigeration capacity |
KW | 153 |
| Kcal/h | 132010 | |
| Compressor | Type | Semi-Closed Screw Compressor |
| Power(HP) | 50 | |
| Brand | Taiwan Hanbell | |
| Start Mode | Y-△ | |
| Energy Control | 0-25-50-75-100 | |
| Number | 1 | |
| Condenser | Type | Efficient copper tube with aluminum finned + low noise outer rotor fan |
| Air volume（m³/H） | 51000 | |
| Evaporator | Type | Shell and Tube |
| Cooling water（m³/H） | 26 | |
| Inlet and outlet pipe diameter | 3" | |
| Refrigerant | Type | R22 |
| Control mode | External balance thermal expansion valve |
|
| Water pump | Brand | CNP |
| Type | According to customer | |
| Size | L(mm) | 2400 |
| W(mm) | 2250 | |
| H(mm) | 1880 | |
| Weight | KG | 1620 |
| Unit Conversion |
1KW=860KCAL/HR 1RT=3024KCAL/HR 1BTU/HR=0.252KCAL/HR | |
| Note: 1.Chilled water range 3-35 ℃, chilled water inlet temperature difference 3-8 ℃, cooling water range 18-37 ℃, cooling water inlet temperature 3.5-10 ℃. 2.Refrigeration capacity is according to, the chilled water inlet and outlet temperature is 12 ℃/7 ℃, the cooling water inlet and outlet temperature is 35 ℃/30 ℃. 3.Above parameters are voltage 380v50hz 3 phase,refrigerant R22..Other parameters please call staff. Protection device :motor overload, motor overheating,High temperature evacuation, oil pressure difference protection, high and low pressure protection |
||
| Model | SV-LFD60A | |
| Voltage | 380V/50Hz/3Phase | |
| lnput Power | KW | 64 |
| Temperature range | 3℃ - indoor temperature (below 0 ℃ can be customized) |
|
| Refrigeration capacity |
KW | 167.1 |
| Kcal/h | 143706 | |
| Compressor | Type | Semi-Closed Screw Compressor |
| Power(HP) | 60 | |
| Brand | Taiwan Hanbell | |
| Start Mode | Y-△ | |
| Energy Control | 0-25-50-75-100 | |
| Number | 1 | |
| Condenser | Type | Efficient copper tube with aluminum finned + low noise outer rotor fan |
| Air volume（m³/H） | 63000 | |
| Evaporator | Type | Shell and Tube |
| Cooling water（m³/H） | 28.74 | |
| Inlet and outlet pipe diameter | 3" | |
| Refrigerant | Type | R22 |
| Control mode | External balance thermal expansion valve |
|
| Water pump | Brand | CNP |
| Type | According to customer | |
| Size | L(mm) | 2480 |
| W(mm) | 2300 | |
| H(mm) | 1980 | |
| Weight | KG | 1930 |
| Unit Conversion |
1KW=860KCAL/HR 1RT=3024KCAL/HR 1BTU/HR=0.252KCAL/HR | |
| Note: 1.Chilled water range 3-35 ℃, chilled water inlet temperature difference 3-8 ℃, cooling water range 18-37 ℃, cooling water inlet temperature 3.5-10 ℃. 2.Refrigeration capacity is according to, the chilled water inlet and outlet temperature is 12 ℃/7 ℃, the cooling water inlet and outlet temperature is 35 ℃/30 ℃. 3.Above parameters are voltage 380v50hz 3 phase,refrigerant R22..Other parameters please call staff. Protection device :motor overload, motor overheating,High temperature evacuation, oil pressure difference protection, high and low pressure protection |
||
| Model | SV-LFD80A | |
| Voltage | 380V/50Hz/3Phase | |
| lnput Power | KW | 84 |
| Temperature range | 3℃ - indoor temperature (below 0 ℃ can be customized) |
|
| Refrigeration capacity |
KW | 203 |
| Kcal/h | 175182 | |
| Compressor | Type | Semi-Closed Screw Compressor |
| Power(HP) | 80 | |
| Brand | Taiwan Hanbell | |
| Start Mode | Y-△ | |
| Energy Control | 0-25-50-75-100 | |
| Number | 1 | |
| Condenser | Brand | Kaifeng |
| Type | Efficient copper tube with aluminum finned + low noise outer rotor fan | |
| Air volume（m³/H） | 80000 | |
| Evaporator | Brand | Kaifeng |
| Type | Shell and Tube | |
| Cooling water（m³/H） | 35.03 | |
| Inlet and outlet pipe diameter | 4" | |
| Refrigerant | Type | R22 |
| Control mode | External balance thermal expansion valve |
|
| Water pump | Brand | CNP |
| Type | According to customer | |
| Size | L（mm) | 2600 |
| W(mm) | 2300 | |
| H(mm) | 1980 | |
| Weight | KG | 2260 |
| Unit Conversion |
1KW=860KCAL/HR 1RT=3024KCAL/HR 1BTU/HR=0.252KCAL/HR | |
| Note: 1.Chilled water range 3-35 ℃, chilled water inlet temperature difference 3-8 ℃, cooling water range 18-37 ℃, cooling water inlet temperature 3.5-10 ℃. 2.Refrigeration capacity is according to, the chilled water inlet and outlet temperature is 12 ℃/7 ℃, the cooling water inlet and outlet temperature is 35 ℃/30 ℃. 3.Above parameters are voltage 380v50hz 3 phase,refrigerant R22..Other parameters please call staff. Protection device :motor overload, motor overheating,High temperature evacuation, oil pressure difference protection, high and low pressure protection |
||
| Model | SV-LFD100A | |
| Voltage | 380V/50Hz/3Phase | |
| lnput Power | KW | 109 |
| Temperature range | 3℃ - indoor temperature (below 0 ℃ can be customized) |
|
| Refrigeration capacity |
KW | 263.5 |
| Kcal/h | 226610 | |
| Compressor | 类型Type | Semi-Closed Screw Compressor |
| Power(HP) | 100 | |
| Brand | Taiwan Hanbell | |
| Start Mode | Y-△ | |
| Energy Control | 0-25-50-75-100 | |
| Number | 1 | |
| Condenser | Brand | Kaifeng |
| Type | Efficient copper tube with aluminum finned + low noise outer rotor fan | |
| Air volume（m³/H） | 105000 | |
| Evaporator | Brand | Kaifeng |
| Type | Shell and Tube | |
| Cooling water（m³/H） | 45.3 | |
| Inlet and outlet pipe diameter | 4" | |
| Refrigerant | Type | R22 |
| Control mode | External balance thermal expansion valve |
|
| Water pump | Brand | CNP |
| Type | According to customer | |
| Size | L（mm) | 4050 |
| W(mm) | 2300 | |
| H(mm) | 2020 | |
| Weight | KG | 3340 |
| Unit Conversion |
1KW=860KCAL/HR 1RT=3024KCAL/HR 1BTU/HR=0.252KCAL/HR | |
| Note: 1.Chilled water range 3-35 ℃, chilled water inlet temperature difference 3-8 ℃, cooling water range 18-37 ℃, cooling water inlet temperature 3.5-10 ℃. 2.Refrigeration capacity is according to, the chilled water inlet and outlet temperature is 12 ℃/7 ℃, the cooling water inlet and outlet temperature is 35 ℃/30 ℃. 3.Above parameters are voltage 380v50hz 3 phase,refrigerant R22..Other parameters please call staff. Protection device :motor overload, motor overheating,High temperature evacuation, oil pressure difference protection, high and low pressure protection |
||